Today I was on the Good Morning Show!

Pro Panel skirts: A Sewing Project

Today I'm going to tell you about how I made attractive and useful "skirts" for my Pro Panels.

If you read my blog, you might remember that I bought Pro Panels for my art booth last year. (If you don't know what I'm talking about, you can read about it here.)

Pro Panels are carpet-covered display walls that can be put up and taken down easily to display various kinds of art. I use mine to hang my framed watercolor artwork at arts & craft shows. The Pro Panels have adjustable legs to hold them up off the ground. When the legs are extended, you can see underneath my panels and into the next artist's booth, or into any storage areas that I may have. I wanted an attractive way to solve this problem, so I decided to make removable skirts that would attach to the bottoms of my panels and hide whatever was on the other side. Pro Panels does sell a type of removable covering on their website, by the way, but their covers are very plain, and I wanted something better-looking.

I purchased some pretty upholstery fabric online, designed a pattern, and set to work. I chose upholstery fabric because it looks more upscale, and the heaviness of it prevents my skirts from blowing around at outdoor shows. They retain their shape nicely wherever I go. I also decided that they would attach to the Pro Panels along the bottom by fastening them to the back of the panels with Velcro. This meant that they would need to be tall enough to overlap the back of the panels. My panels are 38 1/2 inches wide, and I usually set the legs about a foot or so from the ground. After a little bit of trial and error, I also decided that they needed to be a little bit wider than the width of the panels, to ensure good coverage. My completed skirts measure 14 1/2" tall and 40" wide.

So... I cut large rectangles out of my fabric (18 1/2" x 43 1/2"), and hemmed them as shown.

First I hemmed the sides.

Then I hemmed the top and bottom.
I made the hem the largest on the bottom (2") to make it look nice and professional.

For each hem, it is necessary to first measure, then pin, then iron in a crease. Then do the second fold. Pin it and iron it. Then sew a straight stitch all the way from one end to the other. If you are using upholstery fabric, like I am, don't forget to buy upholstery or heavy-duty thread! Once you have hemmed all four sides of your skirt, sew the velcro all the way across the top of the skirt. I sewed mine to the front of the skirts so that I could attach them to the back of the Pro Panels.

Three sides done.. measuring for the bottom hem.




Finished skirts!

Thanks so much for reading my blog and I hope you found my instructions helpful! I would love to read your comments, and would be glad to answer any questions.

My watercolor art site: www.lauraposs.com

When you're finished leaving your comments below, head over to Facebook to like my page for all the latest news!

My new skirts in action! :D

Booth Upgrade, Step 2: A New Display Canopy!

So.. I published step one of my booth upgrade last April with the intentions of moving on with step two the following week. That was about 5 months ago. Pathetic, I know.. but, hey! I've been busy; what can I say? But I do know how to stick with a topic, no matter how long it takes. So, without further ado...

Art Booth Upgrade- Step Two: A New Display Canopy!

When I started doing art shows in 2009, I needed a tent to use. After shopping around, I purchased one of the nicer EZ-Up tents. Not the kind with the colored top and the legs that sprawl outward from the top, but a white one with zippered walls that you can roll up and fasten at the top when you're not using them. I was so pleased with it. It even had an awning that stuck out above the front entrance.

Here's a photo of the tent in action, at my very first show.

Not too shabby, eh? So it wasn't the best setup ever, but it was a start. And I continued to use that tent very happily for the next two years. The only real complaint I had about it was that the roof would puddle and sag when it rained very much, and it could cause the water to drip through. But this could be fixed by using some pool noodles to prop it up at the corners.

So why did I need a new tent? I found out last April. I was doing my first outdoor show of the year in Charlotte, NC, and there had been a storm overnight and through the early morning. We set up late because of the nasty weather. My husband, John, and I had just finished placing the last of the merchandise. Then, all of a sudden, a big gust of wind came along. The wind caught the underside of the EZ-Up's roof, and I saw one leg of the tent begin to lift up in the air. I immediately grabbed the leg and held it down to the ground. The gust of wind passed, but it was too late. The tent had knocked into my ProPanel display walls and sent them tumbling to the ground like dominoes. It was a horrific scene. Artwork and panels were lying everywhere, and matted prints and bookmarks were blowing down the sidewalk. Thankfully many of our neighbors came to help (Thank you, neighbors!!), and we were able to pack up and remove our things with very little damage. The Pro Panels are not very heavy, and covered in carpet, and they seemed to cushion the fall for the framed artwork, because none of the glass broke.

However, we did learn a lesson. We didn't trust our EZ-Up anymore. So for the rest of the weekend John researched all the choices available, and we decided to purchase a Trimline Canopy from Flourish. It is a superior canopy to any other that I have seen, and the company was so helpful. They knew we had another show that weekend, and shipped it out right away so that we had it before our next show. Apparently they get a lot of Monday morning calls from artists who have lost their display to bad weather and feeble tents, and are happy to be the ones to the rescue.

Here is a photo of the Trimline in action:

The new canopy does take a lot longer to set up. It comes in pieces that you assemble, rather than a pop-up sort of design, but that 's why it's so strong. It is also made of much thicker, stronger materials, has far better zippers, and the wind/heat vents on the gable ends are really helpful. Even the awning is far better. The old one would sag, especially in the rain, but not the Trimline awning! They have tons of optional accessories, too. We chose the frosty top and awning to let more light in, and added a stay-bar kit to help stabilize the legs. You can also order extra awnings for the sides and back, and lots of other great stuff. It's all on the Flourish website at www.flourish.com.

Questions? Comments? I want to hear them!!

And when you're through, would you mind stopping by my facebook page and "liking" it? www.facebook.com/lposs.art Gracias, Amigos! :D